NAME
Dawa -- A runtime debugger for Raku programs
SYNOPSIS
In example.raku:
use Dawa;
my $x = 100;
$x = $x + 1;
stop;
$x = $x + 10000;
$x++;
$x++;
$x++;
Then:
∙ Stopping thread Thread #1 (Initial thread)
--- current stack ---
in block <unit> at eg/example.raku line 6
-- current location --
2 │ │
3 │ │ my $x = 100;
4 │ │ $x = $x + 1;
5 │ │ stop;
6 │ [1]▶ │ $x = $x + 10000;
7 │ │ $x++;
8 │ │ $x++;
9 │ │ $x++;
10 │ │
Type h for help
dawa [1]> $x
101
dawa [1]> n
7 ▶ $x++;
dawa [1]> $x
10101
dawa [1]> n
8 ▶ $x++;
dawa [1]> $x
10102
dawa [1]> c
In the example above [1]▶ indicates that this is the next
statement that will be executed by thread 1. After advancing
one statement (with n), the statement that has not yet been
executed (and is coming up next) will be shown.
DESCRIPTION
Dawa provides functionality that is inspired by
Ruby's pry and Python's
import pdb; pdb.set_trace()
idiom.
It exports one subroutine: stop, which will pause
execution of the current thread of the program, and
allow for introspecting the stack, and stepping through
subsequent statements.
Using this module is heavy-handed -- currently just the use
command will add a lot of unused extra statements to the AST.
(This implementation may change in the future.)
USAGE
After stop is reached, a repl is started, which has a few
commands. Type h to see them. Currently, these are the commands:
The following commands are available:
break (b) : [N [filename] ] add a breakpoint at line N [in filename]
continue (c, ^D) : continue execution of this thread
defer (d) : [n] Defer to thread [n], or the next waiting one
eval (e) : [id] evaluate code in the current context [or in thread #id]
help (h) : this help
ls (l) : [-a] [id] show [all] lexical variables in the current scope [or in thread #id]
next (n) : run the next statement in any thread
quit (q) : terminate the program (exit)
step (s) : execute the next statement in the same thread
threads (t) : [id] show threads being tracked [or just thread #id]
where (w) : show a stack trace and the current location in the code
Pressing [enter] by itself on a blank line is the same as next.
Anything else is treated as a Raku statement: it will be evaluated,
the result will be shown.
Breakpoints
Breakpoints can be set with b, for example:
dawa [1]> b 13
Added breakpoint at line 13 in eg/debug.raku
dawa [1]> w
10 │ │
11 │ [1]▶ │ say "three";
12 │ │ say "four";
13 │ ■ │ $x = $x + 11;
14 │ │ say "five";
15 │ │ say "x is $x";
16 │ │ say "bye";
17 │ │
As shown above, breakpoints are indicated using ■ and are not
thread-specific. The triangle (▶) is the next line of code that
will be executed. The [1] indicates the next statement to be executed
by thread 1. The [1] in the prompt indicates that statements
will currently be evaluated in the context of thread 1 by default.
Multiple Threads
If several threads are stopped at once, a lock is used in order to
only have one repl at a time. Threads wait for this lock. After
either continuing or going on to the next statement, another thread
that is waiting for the lock may potentially become active in the repl.
i.e. "next" advances to the next statement in any thread. To stay in
the same thread, use "step".
∙ Stopping thread Thread #1 (Initial thread)
--- current stack ---
in block <unit> at example.raku line 11
-- current location --
3 │ │ my $i = 1;
4 │ │
5 │ │ start loop {
6 │ │ $i++;
7 │ [7] │ $i++;
8 │ │ }
9 │ │
10 │ │ stop;
11 │ [1]▶ │ say 'bye!';
12 │ │
Type h for help
dawa [1]>
Note that in this situation thread 7 continues to run even while the repl
is active. To also stop thread 7 while debugging, you can add a breakpoint
(since breakpoints apply to all threads).
The eval command can be used to evaluate expression in another thread. For instance,
eval 7 $i will evaluate the $i in thread 7.
The ls command can show lexical variables in another thread. Note that only variables
in the innermost lexical scope will be shown.
The defer command can be used to switch to another stopped thread. Here is an example:
Switching between threads
When multiple threads are stopped, defer will switch from one to another.
For instance, the example below has eg/defer.raku, with threads 7-11 stopped,
as well as thread 1. After looking at the stack in thread 1, typing d 8
will change to thread 8, and subsequent commands will run in the context
of that thread. (also note that if a lot of threads are stopped at the same
line of code, they are shown in a footnote)
dawa [1]> w
--- current stack ---
in block <unit> at eg/defer.raku line 16
-- current location --
4 │ │ start {
5 │ │ my $x = 10;
6 │ │ loop {
7 │ │ stop;
8 │ (a) │ $x++;
9 │ │ }
10 │ │ }
11 │ │ }
12 │ │
13 │ │ my $y = 100;
14 │ │ loop {
15 │ │ stop;
16 │ [1]▶ │ say "y is $y";
17 │ │ $y += 111;
18 │ │ last if $y > 500;
19 │ │ }
20 │ │
────────────────────────────────────────
(a) : [8][9][7][10][11]
────────────────────────────────────────
dawa [1]> d 8
8 ▶ $x++;
dawa [8]> w
--- current stack ---
in block at eg/defer.raku line 8
-- current location --
4 │ │ start {
5 │ │ my $x = 10;
6 │ │ loop {
7 │ │ stop;
8 │ (a)▶ │ $x++;
9 │ │ }
10 │ │ }
11 │ │ }
12 │ │
13 │ │ my $y = 100;
14 │ │ loop {
15 │ │ stop;
16 │ [1] │ say "y is $y";
17 │ │ $y += 111;
18 │ │ last if $y > 500;
19 │ │ }
20 │ │
────────────────────────────────────────
(a) : [8][9][7][10][11]
────────────────────────────────────────
dawa [8]> $x
10
ABOUT THE NAME
The word dawa can refer to either medicine or poison in Swahili. In the
latter sense, it would be used to describe bug spray, i.e. a debugger -- but
hopefully it'll also help be a cure for any ailments in your programs.
SEE ALSO
There is a built-in repl statement, which will pause execution
and start a repl loop at the current location.
rakudo-debugger provides
a separate executable for debugging. Techniques there inspired
this module.
ENVIRONMENT
The readline history is stored in DAWA_HISTORY_FILE, ~/.dawa-history by default.
BUGS
Since this relies on undocumented behavior, it could break at any time. Modifying
the AST may also cause your program to behave in unexpected ways. It may be
possible to improve this once the AST work in Raku is available.
The stop routine won't work if it is the last statement in a file.
There are probably other bugs -- let me know and send a patch! Also
a mailing list is available to discuss features and send patches:
https://lists.sr.ht/~bduggan/raku-dawa
AUTHOR
Brian Duggan (bduggan at matatu.org)